CUTTINGTOOLS / AI
Find equivalents

Cross-brand grade equivalence · brand-neutral

Kennametal KCPM30: candidate alternatives

How to read this page. These alternatives are compiled from grade comparison charts the manufacturers publish themselves. A direct peer is a grade listed in the same row of a manufacturer comparison chart as KCPM30: that is chart comparability, not verified cutting performance and not a drop-in swap. Grades that share only the ISO 513 application position are listed apart, marked not verified. Substrate, cobalt content, coating and edge preparation still differ, and so will tool life and the cutting data you should start from. Validate any swap on a sample part before you change production. Something wrong on this page, or a grade you want removed? research@cuttingtoolsai.eu.

Kennametal KCPM30 sits at ISO 513 application classes M20, M30, P30 — stainless steel, steel. No manufacturer chart on file lists a direct peer for it. 151 grades from other makers share an ISO position with it. None has been verified.

Alternatives by evidence

Direct peers

Listed in the same row of a manufacturer comparison chart. This is chart comparability, not verified cutting performance.

No manufacturer chart on file lists a direct peer for this grade. Grades at the same ISO position are listed as not verified.

Same ISO position, not verified

These grades overlap in ISO position only. No manufacturer chart lists them together, and operation and tool material are not verified.

  • Kyocera PR1525 ISO M20 M30 P30 · not verified
  • Mitsubishi UTi20T ISO M20 M30 P30 · not verified
  • Kyocera CA6535 ISO M20 M30 · not verified
  • Kyocera PR1225 ISO M20 M30 · not verified · carbide
  • Kyocera PR1535 ISO M30 P30 · not verified · carbide

128 more not shown.

Tougher alternatives

Positioned above this grade on the ISO scale (more toughness, less wear resistance). ISO position only, not verified.

  • Kyocera PR1725 ISO M30 · not verified
  • Mitsubishi VP20MF ISO M30 · not verified
  • Seco CP600 ISO M30 · not verified
  • Sumitomo AC530U ISO M30 · not verified
  • Mitsubishi US735 ISO M30 · not verified

4 more not shown.

More wear-resistant alternatives

Positioned below this grade on the ISO scale (more wear resistance, less toughness). ISO position only, not verified.

  • Walter WSM20S ISO M20 · not verified
  • MOLDINO IP100S ISO M20 · not verified
  • Sandvik GC2220 ISO M20 · not verified
  • ISCAR IC07 ISO M20 · not verified
  • ISCAR IC08 ISO M20 · not verified

4 more not shown.

The free check and the report show each grade with its sources: check KCPM30 free.

What this does and does not tell you

An ISO 513 application class says which material group and which range of operations a grade is built for. Two grades sharing a class are built for the same job. They are not identical: substrate grain, cobalt content, coating and edge preparation still differ, and so will tool life and the cutting data you should start from. Treat a candidate here as the shortlist for your own trial, not as a drop-in replacement.

Everything above is derived from the makers' own published application data. Nothing is inferred from price, availability or popularity, and no manufacturer pays to appear here.

Related candidate alternatives

All cross-brand grade candidates

Source-backed grade report · PDF + XLSX

Check Kennametal KCPM30 against the published chart evidence first. If this grade has a documented candidate, you can order an automatically generated report for one grade (about US$10, charged EUR 9), or add up to two grades (about US$24, charged EUR 22). Currency conversion and tax at checkout may change the USD amount. A chart comparison is not a guaranteed substitute.

Check this grade and see the report →
Cost check · free · brand-neutral

Are you overpaying on your Kennametal KCPM30 inserts? Paste your insert list and get a cost audit in about 30 seconds: cross-brand candidate alternatives at the same ISO application position, and where you are likely overpaying. No signup, no sales call.

Run a free cost audit → Check your whole grade list · free

After the free check: a sourced PDF + XLSX report from EUR 9 for one grade. How buying works

Ask about your own case

Material, operation, machine — get a grade and a starting cutting data set, grounded in the same reference data.