Reference library · carbide insert grades
Compare Carbide Grades Across Suppliers
Looking for a supplier with a candidate alternative to a competitor carbide grade? Compare 53 carbide insert grades from 9 brands — ISCAR, Kennametal, Korloy, Mitsubishi, Sandvik, Seco, TaeguTec, Tungaloy, Walter — with ISO application position, coating and candidate alternative grades from other brands, cross-referenced from manufacturer-published charts. One page per grade; same data as the carbide insert cross reference chart. Chart placement is not an interchangeability claim — verify on a sample part. Grades with a candidate named by two or more manufacturer charts are listed in the cross-brand grade candidates index. Brand charts: Kennametal insert grade chart lists every Kennametal grade in the reference DB, including those without a page here.
Looking for what replaced an older grade? Maker-listed grade successors →
Need one manufacturer's complete grade chart? This 53-grade hub compares across brands. Open the full chart for a specific maker:
ISCAR
8 ISCAR grades in this comparison, with ISO application position, coating and candidate alternatives from other brands. Full brand chart: ISCAR carbide grade chart →
| Grade | ISO application | Coating | Equivalents |
|---|---|---|---|
| IC28 | P30–P40 / M30 / S20 | Uncoated carbide | 5 comparable → |
| IC5010 | K10–K15 | — | 10 comparable → |
| IC6025 | M20 | SUMO TEC® CVD | 5 comparable → |
| IC806 | M10 / S05–S10 | PVD TiAlN (SUMO TEC®) | 2 comparable → |
| IC8150 | P05–P15 | SUMO TEC® CVD Al₂O₃ | 6 comparable → |
| IC8250 | P20–P25 | SUMO TEC® CVD Al₂O₃ | 6 comparable → |
| IC8350 | P30–P35 | SUMO TEC® CVD Al₂O₃ | 6 comparable → |
| IC908 | P20–P25 / M10–M35 / K20 / S20–S25 | PVD TiAlN | 1 comparable → |
Kennametal
9 Kennametal grades in this comparison, with ISO application position, coating and candidate alternatives from other brands. Full brand chart: Kennametal insert grade chart →
| Grade | ISO application | Coating | Equivalents |
|---|---|---|---|
| KC5010 | P15 / M20 / K10 / S10–S15 | — | see page → |
| KC9110 | P10–P15 | — | 6 comparable → |
| KC9125 | P20–P25 | — | 10 comparable → |
| KCM25B | M15–M20 | MT-CVD TiCN/Al₂O₃ | 5 comparable → |
| KCP10B | P10 | KENGold™ CVD | 6 comparable → |
| KCP25B | P20–P25 | KENGold™ CVD | 6 comparable → |
| KCP30B | P30–P35 | KENGold™ CVD | 6 comparable → |
| KCU10B | — | PVD AlTiN | 2 comparable → |
| KCU25 | P20–P25 / M30–M35 / K20 / S20–S25 | PVD AlTiN | 5 comparable → |
Korloy
1 Korloy grade in this comparison, with ISO application position, coating and candidate alternatives from other brands. Full brand chart: Korloy carbide grade chart →
| Grade | ISO application | Coating | Equivalents |
|---|---|---|---|
| NC6315 | K10–K15 | — | 10 comparable → |
Mitsubishi
6 Mitsubishi grades in this comparison, with ISO application position, coating and candidate alternatives from other brands. Full brand chart: Mitsubishi carbide grade chart →
| Grade | ISO application | Coating | Equivalents |
|---|---|---|---|
| MC6015 | P10 | CVD Al₂O₃ | 6 comparable → |
| MC6025 | P20–P25 | CVD Al₂O₃ | 6 comparable → |
| MC6035 | P30–P40 | CVD Al₂O₃ | 6 comparable → |
| MC7025 | M20–M30 | CVD | 5 comparable → |
| MH515 | K20 | — | 4 comparable → |
| VP15TF | P05–P30 / M10–M35 / K20–K30 / S20–S25 | PVD TiAlN (Miracle) | 0 comparable → |
Sandvik
9 Sandvik grades in this comparison, with ISO application position, coating and candidate alternatives from other brands. Full brand chart: Sandvik carbide grade chart →
| Grade | ISO application | Coating | Equivalents |
|---|---|---|---|
| GC1105 | M10 / S05–S10 | — | 22 comparable → |
| GC1115 | M15 / S10–S15 | — | 22 comparable → |
| GC2220 | M15–M20 | MT-CVD TiCN/Al₂O₃ | 5 comparable → |
| GC3040 | K20 | CVD | 1 comparable → |
| GC4220 | P10 | — | see page → |
| GC4315 | P10–P15 | Inveio® CVD | 6 comparable → |
| GC4325 | P20–P30 | Inveio® CVD Al₂O₃ | 6 comparable → |
| GC4335 | P30–P40 | Inveio® CVD | 6 comparable → |
| H13A | M20 / K10–K20 / N10–N30 / S15–S20 | Uncoated carbide | 5 comparable → |
Seco
6 Seco grades in this comparison, with ISO application position, coating and candidate alternatives from other brands. Full brand chart: Seco insert grade chart →
| Grade | ISO application | Coating | Equivalents |
|---|---|---|---|
| H15F | N | Uncoated fine-grain carbide | 5 comparable → |
| TK2000 | K10–K20 | — | 10 comparable → |
| TM2501 | M20 / S20 | Duratomic® CVD | 5 comparable → |
| TP1500 | P10–P15 | Duratomic® CVD | 6 comparable → |
| TP2500 | P20–P25 | Duratomic® CVD | 6 comparable → |
| TP3500 | P30–P40 | Duratomic® CVD | 6 comparable → |
TaeguTec
1 TaeguTec grade in this comparison, with ISO application position, coating and candidate alternatives from other brands. Full brand chart: TaeguTec carbide grade chart →
| Grade | ISO application | Coating | Equivalents |
|---|---|---|---|
| TT7310 | K10 | — | 10 comparable → |
Tungaloy
6 Tungaloy grades in this comparison, with ISO application position, coating and candidate alternatives from other brands. Full brand chart: Tungaloy carbide grade chart →
| Grade | ISO application | Coating | Equivalents |
|---|---|---|---|
| AH630 | P15 / M15–M20 / S20 | — | 25 comparable → |
| AH8015 | M20 / S10 | PVD AlTiN | 2 comparable → |
| T1010 | N | Uncoated | 5 comparable → |
| T9115 | P10–P20 / M10 | CVD TiCN/Al₂O₃ | 6 comparable → |
| T9125 | P20–P30 / M20 | CVD TiCN/Al₂O₃ | 6 comparable → |
| T9235 | P30–P40 | CVD TiCN/Al₂O₃ | 6 comparable → |
Walter
7 Walter grades in this comparison, with ISO application position, coating and candidate alternatives from other brands. Full brand chart: Walter carbide grade chart →
| Grade | ISO application | Coating | Equivalents |
|---|---|---|---|
| WNK10 | N | Uncoated sharp | 5 comparable → |
| WPP10S | P10–P15 | Tiger·tec® Silver CVD | 6 comparable → |
| WPP20S | P20–P25 | Tiger·tec® Silver CVD | 6 comparable → |
| WPP30S | P30–P35 | Tiger·tec® Silver CVD | 6 comparable → |
| WSM01 | P05 / M10 / S05–S10 | — | 22 comparable → |
| WSM20S | M15–M35 / S20–S25 | Tiger·tec® Silver PVD | 5 comparable → |
| WSP45S | P30–P40 / M40 | — | see page → |
More brand charts, not yet in the comparison table above: Sumitomo carbide grade chart · Kyocera carbide grade chart · MOLDINO carbide grade chart · NTK carbide grade chart
Carbide grade chart FAQ
How do I read a carbide insert grade chart?
Each grade is placed on the ISO 513 application scale: a letter for the material group (P steel, M stainless, K cast iron, N non-ferrous, S superalloys, H hardened steel) and a number from 01 to 50. Lower numbers mean higher wear resistance for finishing; higher numbers mean higher toughness for roughing and interrupted cuts.
How do I find the equivalent of a grade in another brand?
Look up the grade’s ISO application position, then find grades from other manufacturers published at the same position. Every grade page in this index lists its candidate alternative grades (not verified equivalents). This chart covers 53 grades; the AI advisor covers grades not yet listed here.
Are equivalent carbide grades interchangeable?
No. Grades at the same ISO application position are comparable starting points, not identical substitutes — substrate, coating and edge preparation differ between brands. Always verify on a sample part before switching.
Are you overpaying on your inserts? Paste your insert list and get a cost audit in about 30 seconds: cross-brand candidate alternatives at the same ISO application position, and where you are likely overpaying. No signup, no sales call.
After the free check: a sourced PDF + XLSX report from about USD 10 (EUR 9) per grade. How buying works