CUTTINGTOOLS / AI
Find equivalents

Cross-brand grade equivalence · brand-neutral

Sumitomo ACP200: candidate alternatives

Sumitomo ACP200 sits at ISO 513 application classes P10, P20, P30 — steel. No manufacturer chart on file lists a direct peer for it. 193 grades from other makers share an ISO position with it. None has been verified.

Alternatives by evidence

Direct peers

Listed in the same row of a manufacturer comparison chart. This is chart comparability, not verified cutting performance.

No manufacturer chart on file lists a direct peer for this grade. Grades at the same ISO position are listed as not verified.

Same ISO position, not verified

These grades overlap in ISO position only. No manufacturer chart lists them together, and operation and tool material are not verified.

  • Mitsubishi VP15TF ISO P10 P20 P30 · not verified · carbide
  • ISCAR IC30N ISO P10 P20 P30 · not verified
  • Tungaloy AH120 ISO P10 P20 P30 · not verified
  • Kyocera PV720 ISO P10 P20 · not verified · cermet
  • Kyocera TN620 ISO P10 P20 · not verified · cermet

83 more not shown.

Tougher alternatives

Positioned above this grade on the ISO scale (more toughness, less wear resistance). ISO position only, not verified.

  • ISCAR IC8350 ISO P30 · not verified
  • Kyocera PV730 ISO P30 · not verified · cermet
  • Mitsubishi VP45N ISO P30 · not verified
  • Tungaloy SH730 ISO P30 · not verified
  • Kennametal KC530M ISO P30 · not verified

53 more not shown.

More wear-resistant alternatives

Positioned below this grade on the ISO scale (more wear resistance, less toughness). ISO position only, not verified.

  • Kyocera PV710 ISO P10 · not verified · cermet
  • Mitsubishi MS6015 ISO P10 · not verified
  • Walter WPP10S ISO P10 · not verified
  • Kennametal KCP10 ISO P10 · not verified
  • Kyocera CA515 ISO P10 · not verified

42 more not shown.

The free check and the report show each grade with its sources: check ACP200 free.

Related candidate alternatives

More Sumitomo grades with a cross-brand page:

Other makers' grades at the same ISO position (P10, P20, P30):

All cross-brand grade candidates

How to read this page. A direct peer is a grade listed in the same row of a manufacturer comparison chart as ACP200: chart comparability, not verified cutting performance and not a drop-in swap. Grades sharing only the ISO 513 position are listed apart, marked not verified. Substrate, cobalt content, coating and edge preparation still differ, so validate any swap on a sample part. Nothing here is inferred from price, availability or popularity, and no manufacturer pays to appear. Something wrong, or a grade you want removed? research@cuttingtoolsai.eu.

Source-backed grade report · PDF + XLSX

Check Sumitomo ACP200 against the published chart evidence first. If this grade has a documented candidate, you can order an automatically generated report for one grade (about US$10, charged EUR 9), or add up to two grades (about US$24, charged EUR 22). Currency conversion and tax at checkout may change the USD amount. A chart comparison is not a guaranteed substitute.

Check this grade and see the report →
Cost check · free · brand-neutral

Are you overpaying on your Sumitomo ACP200 inserts? Paste your insert list and get a cost audit in about 30 seconds: cross-brand candidate alternatives at the same ISO application position, and where you are likely overpaying. No signup, no sales call.

Run a free cost audit → Check your whole grade list · free

After the free check: a sourced PDF + XLSX report from EUR 9 for one grade. How buying works

Ask about your own case

Material, operation, machine — get a grade and a starting cutting data set, grounded in the same reference data.