Insert cross-reference · Round · 7° clearance · 12mm diameter · 4.76mm thick
RCMT1204 Cross Reference / ANSI RCMT 43
Equivalent RCMT1204 inserts across 4 brands — Sandvik, ISCAR, Kennametal, Tungaloy. In US (inch, ANSI B212.4) catalogs this same insert is listed as RCMT 43 — identical geometry, different designation system. Same ISO 1832 geometry class; grades, coatings and application windows differ by manufacturer. Treat equivalents as starting points and verify on a sample part: a cross-reference matches the geometry, not the process.
A general-purpose nose radius: a balance of edge strength and finish that suits most first-choice turning before you tune up for finishing or down for roughing.
Brand equivalents — RCMT1204
| Brand | Designation / grade | Coating | Application |
|---|---|---|---|
| Sandvik | RCMT 12 04 M0-SM S205 | CVD Al₂O₃ | ISO S (HRSA) |
| ISCAR | RCMT 1204M0-14 IC806 | PVD TiAlN (SUMO TEC®) | S15–S25 |
| Kennametal | RCMT 120400 KCU10B | PVD AlTiN | universal · incl. S |
| Tungaloy | RCMT1204M0-RS AH8015 | PVD AlTiN | ISO S (HRSA) |
Grades used ISCAR IC806 · Kennametal KCU10B · Tungaloy AH8015
15 brands list RCMT1204 in their published standard programs, with 339 catalog variants across chipbreakers, grades and coatings. Variant count shows how deep each maker's standard range goes for this geometry. It is not a quality ranking.
| Brand | Catalog variants |
|---|---|
| Sandvik-Coromant | 71 |
| Walter | 51 |
| Widia | 48 |
| SECO Tools | 41 |
| Sumitomo | 41 |
| Kennametal | 25 |
| Ingersoll | 21 |
| Tungaloy | 10 |
| Iscar | 7 |
| Ceratizit | 6 |
| Mitsubishi Materials | 6 |
| ZCC Cutting Tools | 6 |
| WNT | 3 |
| Hahn+Kolb | 2 |
| Kyocera | 1 |
Hahn+Kolb is a distributor private-label program (ATORN). Counts are catalog listings, not stock levels. Availability varies by region and distributor.
ISO designation decoded — what RCMT1204 means
- R — shape
- round
- C — clearance angle
- relief angle 7°
- M — tolerance
- class M — molded, medium tolerance on inscribed circle and corner point (typically ±0.05–0.13 mm depending on size)
- T — type
- fixing hole with countersink, chipbreaker on one face (single-sided positive insert)
- 12 — diameter
- 12 mm insert diameter
- 04 — thickness
- insert thickness 4.76 mm
Cross-reference a grade at its ISO position
Type any maker's grade (e.g. GC4325, AC820P, T9215) to see grades other brands publish at the same ISO application position. VERIFIED = multi-source consensus; 2+ CHARTS = placement confirmed by two or more manufacturer-published charts; SINGLE-SOURCE = one chart only. Comparable at ISO position — not identical performance. Verify on a sample part.
Frequently asked questions
What does RCMT1204 mean?
RCMT1204 is an ISO 1832 insert designation. It decodes as: R — shape = round; C — clearance angle = relief angle 7°; M — tolerance = class M — molded, medium tolerance on inscribed circle and corner point (typically ±0.05–0.13 mm depending on size); T — type = fixing hole with countersink, chipbreaker on one face (single-sided positive insert); 12 — diameter = 12 mm insert diameter; 04 — thickness = insert thickness 4.76 mm.
What is RCMT1204 used for?
RCMT1204 is a turning insert. The brand-equivalents table on this page lists each maker's grade and its ISO application window (the P, M, K and similar ranges). Match the geometry first, then choose the grade for your material and operation, and verify on a sample part.
What is the equivalent of RCMT1204 across brands?
RCMT1204 is a shared ISO 1832 geometry, so Sandvik, ISCAR, Kennametal, Tungaloy each offer it in their own grades and coatings. A cross-reference matches the geometry, not the process, so treat equivalents as starting points and verify on a sample part.
Is RCMT1204 a positive insert?
RCMT1204 has positive clearance, so it is a positive, single-sided insert: lower cutting forces, suited to finishing, small parts and low-rigidity setups.
Does this cross-reference favour specific brands?
No. Comparable grades appear here only because manufacturer-published comparison charts place them at the same ISO application position. No manufacturer pays for placement, nothing on this page is sponsored, and CuttingToolsAI sells no tools and earns no commission. Placements backed by a single chart are flagged as such, and every comparison ends the same way: verify on a sample part before switching.
Are you overpaying on your RCMT1204 inserts? Paste your insert list and get a cost audit in about 30 seconds: cross-brand equivalents at the same ISO application position, and where you are likely overpaying. No signup, no sales call.
Related designations