Which carbide grades from other manufacturers are equivalent to Tungaloy T9205?

Tungaloy T9205 sits at ISO 513 P05, P10. Grades from other makers at the same application position, each supported by two or more manufacturer-published comparison charts: Kyocera PR1225 (P05, P10; 3 manufacturer charts); Mitsubishi VP15TF (P05, P10; 3 manufacturer charts); ISCAR IC808 (P05, P10; 2 manufacturer charts); ISCAR IC9015 (P05, P10; 2 manufacturer charts); MOLDINO HG8010 (P05, P10; 2 manufacturer charts); Mitsubishi MC6115 (P05, P10; 2 manufacturer charts); NTK DT4 (P05, P10; 2 manufacturer charts); Sandvik GC1010 (P05, P10; 2 manufacturer charts); Sandvik GC4305 (P05, P10; 2 manufacturer charts); Sumitomo AC8015P (P05, P10; 2 manufacturer charts). Same ISO position is not a drop-in swap; validate any change on one machine and one sample part.

Is a grade at the same ISO 513 position as Tungaloy T9205 interchangeable with it?

No. Same ISO 513 application class means the manufacturers position the grades for the same workpiece group and toughness/wear range, not that coating, substrate and edge preparation are identical. Tool life and surface finish can differ; test the candidate on a sample part before changing production. Source charts are published by the manufacturers themselves; CuttingToolsAI sells no tools and takes no commission.

Cross-brand grade equivalence · brand-neutral

Tungaloy T9205 equivalents

How to read this page. These matches are compiled from grade comparison charts the manufacturers publish themselves, cross-checked against each other. A match means two grades are placed at the same ISO 513 application position, which is where the maker says the grade belongs. It does not mean the grades are interchangeable: substrate, cobalt content, coating and edge preparation still differ, and so will tool life and the cutting data you should start from. Validate any swap on a sample part before you change production. Something wrong on this page, or a grade you want removed? research@cuttingtoolsai.eu.

Tungaloy T9205 sits at ISO 513 application classes P05, P10 — steel. 11 grades from other manufacturers cover that same full range and are confirmed by two or more manufacturer charts.

Grades placed at the same full ISO range

11 grades from other makers cover every one of T9205's application classes, not merely one of them, and are confirmed by two or more manufacturer charts. The 5 best-evidenced are shown; the rest are listed below. A grade that covers only part of the range is not listed as an equivalent here.

Grade	Shared ISO classes	Evidence	Why it placed here
Kyocera PR1225	P05, P10	3 sources	Confirmed by 3 manufacturer charts; covers both ISO classes of your grade (P05, P10); no published property data on file for one or both grades, so this rests on the ISO class alone.
Mitsubishi VP15TF	P05, P10	3 sources	Confirmed by 3 manufacturer charts; covers both ISO classes of your grade (P05, P10); no published property data on file for one or both grades, so this rests on the ISO class alone.
ISCAR IC808	P05, P10	2 sources	Confirmed by 2 manufacturer charts; covers both ISO classes of your grade (P05, P10); no published property data on file for one or both grades, so this rests on the ISO class alone.
ISCAR IC9015	P05, P10	2 sources	Confirmed by 2 manufacturer charts; covers both ISO classes of your grade (P05, P10); no published property data on file for one or both grades, so this rests on the ISO class alone.
MOLDINO HG8010	P05, P10	2 sources	Confirmed by 2 manufacturer charts; covers both ISO classes of your grade (P05, P10); no published property data on file for one or both grades, so this rests on the ISO class alone.

More grades at the same ISO range

These also pass the same check (two or more manufacturer charts, at least half of the range), with less evidence than the grades above.

Grade	Shared ISO classes	Evidence	Why it placed here
Mitsubishi MC6115	P05, P10	2 sources	Confirmed by 2 manufacturer charts; covers both ISO classes of your grade (P05, P10); no published property data on file for one or both grades, so this rests on the ISO class alone.
NTK DT4	P05, P10	2 sources	Confirmed by 2 manufacturer charts; covers both ISO classes of your grade (P05, P10); no published property data on file for one or both grades, so this rests on the ISO class alone.
Sandvik GC1010	P05, P10	2 sources	Confirmed by 2 manufacturer charts; covers both ISO classes of your grade (P05, P10); no published property data on file for one or both grades, so this rests on the ISO class alone.
Sandvik GC4305	P05, P10	2 sources	Confirmed by 2 manufacturer charts; covers both ISO classes of your grade (P05, P10); no published property data on file for one or both grades, so this rests on the ISO class alone.
Sumitomo AC8015P	P05, P10	2 sources	Confirmed by 2 manufacturer charts; covers both ISO classes of your grade (P05, P10); no published property data on file for one or both grades, so this rests on the ISO class alone.

What this does and does not tell you

An ISO 513 application class says which material group and which range of operations a grade is built for. Two grades sharing a class are built for the same job. They are not identical: substrate grain, cobalt content, coating and edge preparation still differ, and so will tool life and the cutting data you should start from. Treat a match here as the shortlist for your own trial, not as a drop-in replacement.

Everything above is derived from the makers' own published application data. Nothing is inferred from price, availability or popularity, and no manufacturer pays to appear here.

Cost check · free · brand-neutral

Are you overpaying on your Tungaloy T9205 inserts? Paste your insert list and get a cost audit in about 30 seconds: cross-brand equivalents at the same ISO application position, and where you are likely overpaying. No signup, no sales call.

Run a free cost audit → Check your whole grade list · free

Ask about your own case

Material, operation, machine — get a grade and a starting cutting data set, grounded in the same reference data.