Cross-brand grade equivalence · brand-neutral
Tungaloy UX30: candidate alternatives
How to read this page. These alternatives are compiled from grade comparison charts the manufacturers publish themselves. A direct peer is a grade listed in the same row of a manufacturer comparison chart as UX30: that is chart comparability, not verified cutting performance and not a drop-in swap. Grades that share only the ISO 513 application position are listed apart, marked not verified. Substrate, cobalt content, coating and edge preparation still differ, and so will tool life and the cutting data you should start from. Validate any swap on a sample part before you change production. Something wrong on this page, or a grade you want removed? research@cuttingtoolsai.eu.
Tungaloy UX30 sits at ISO 513 application classes M30, P30, P35 — stainless steel, steel. No manufacturer chart on file lists a direct peer for it. 121 grades from other makers share an ISO position with it. None has been verified.
Alternatives by evidence
Direct peers
Listed in the same row of a manufacturer comparison chart. This is chart comparability, not verified cutting performance.
No manufacturer chart on file lists a direct peer for this grade. Grades at the same ISO position are listed as not verified.
Same ISO position, not verified
These grades overlap in ISO position only. No manufacturer chart lists them together, and operation and tool material are not verified.
- Kyocera PR1535 ISO M30 P30 P35 · not verified · carbide
- Mitsubishi UTi20T ISO M30 P30 P35 · not verified
- ISCAR IC8350 ISO P30 P35 · not verified
- Kennametal KC735M ISO M30 P30 · not verified
- Mitsubishi VP15TF ISO M30 P30 · not verified · carbide
100 more not shown.
More wear-resistant alternatives
Positioned below this grade on the ISO scale (more wear resistance, less toughness). ISO position only, not verified.
- Kennametal KCPK30 ISO P30 · not verified
- ISCAR IC30N ISO P30 · not verified
- Sandvik GC1125 ISO P30 · not verified
- Sumitomo T2500A ISO P30 · not verified
- Sumitomo T2500Z ISO P30 · not verified · cermet
11 more not shown.
The free check and the report show each grade with its sources: check UX30 free.
What this does and does not tell you
An ISO 513 application class says which material group and which range of operations a grade is built for. Two grades sharing a class are built for the same job. They are not identical: substrate grain, cobalt content, coating and edge preparation still differ, and so will tool life and the cutting data you should start from. Treat a candidate here as the shortlist for your own trial, not as a drop-in replacement.
Everything above is derived from the makers' own published application data. Nothing is inferred from price, availability or popularity, and no manufacturer pays to appear here.
Related candidate alternatives
- Walter WKP35S K20, P20
- Tungaloy T9215 P10, P15, P20
- Walter WSM01 M10, S05, S10
- Tungaloy T9205 P05, P10
- Walter WSM20S M15, M20, S20, S25
- Tungaloy T3225 M20, P20, P30
All cross-brand grade candidates
Check Tungaloy UX30 against the published chart evidence first. If this grade has a documented candidate, you can order an automatically generated report for one grade (about US$10, charged EUR 9), or add up to two grades (about US$24, charged EUR 22). Currency conversion and tax at checkout may change the USD amount. A chart comparison is not a guaranteed substitute.
Check this grade and see the report →Are you overpaying on your Tungaloy UX30 inserts? Paste your insert list and get a cost audit in about 30 seconds: cross-brand candidate alternatives at the same ISO application position, and where you are likely overpaying. No signup, no sales call.
After the free check: a sourced PDF + XLSX report from EUR 9 for one grade. How buying works
Ask about your own case
Material, operation, machine — get a grade and a starting cutting data set, grounded in the same reference data.