CUTTINGTOOLS / AI
Find equivalents

Carbide grade · Mitsubishi · ISO P/M

Mitsubishi MC7020

MC7020 is a Mitsubishi carbide insert grade (Coated), applied in the ISO P/M areas. Its ISO position comes from the manufacturer grade comparison charts in this reference. No manufacturer chart on file lists a direct peer for it. 131 grades from other makers share an ISO position with it. None has been verified. Same position is not the same performance: verify on a sample part before switching.

Same ISO position in the manufacturer charts, with the source on the full page. Running several grades? Separate them with commas to check the whole list. No signup.

Every maker's AI recommends its own tools. Ours compares all makers and shows the published source behind each answer, or tells you it could not verify.

Grade summary

Brand
Mitsubishi
Coating / substrate
Coated
ISO application area
P — steel · M — stainless steel
ISO position (manufacturer charts)
M20 · P20

Cross-brand alternatives (manufacturer charts)

Direct peers

Listed in the same row of a manufacturer comparison chart. This is chart comparability, not verified cutting performance.

No manufacturer chart on file lists a direct peer for this grade. Grades at the same ISO position are listed as not verified.

Same ISO position, not verified

These grades overlap in ISO position only. No manufacturer chart lists them together, and operation and tool material are not verified.

  • Kennametal KC525M ISO M20 P20 · not verified
  • Kyocera PR1225 ISO M20 P20 · not verified · carbide
  • Kyocera PR1525 ISO M20 P20 · not verified
  • MOLDINO HG8025 ISO M20 P20 · not verified
  • NTK DM4 ISO M20 P20 · not verified

126 more not shown.

Check MC7020 with your other grades →

Free · engineer's note · by email

The best-evidenced alternative to Mitsubishi MC7020 from another maker, with published cutting speeds (sourced, and compared only where both makers publish them for the same conditions), coating and what would decide a switch. Usually in your inbox within 30 minutes.

Source-backed grade report · PDF + XLSX

Check Mitsubishi MC7020 against the published chart evidence first. If this grade has a documented candidate, you can order an automatically generated report for one grade (about US$10, charged EUR 9), or add up to two grades (about US$24, charged EUR 22). Currency conversion and tax at checkout may change the USD amount. A chart comparison is not a guaranteed substitute.

Check this grade and see the report →

Frequently asked questions

What is Mitsubishi MC7020?

MC7020 is a Mitsubishi carbide insert grade (Coated), applied in the ISO P/M areas, as positioned in manufacturer grade charts.

Does this cross-reference favour specific brands?

No. Comparable grades appear here only because manufacturer-published comparison charts place them at the same ISO application position. No manufacturer pays for placement, nothing on this page is sponsored, and CuttingToolsAI sells no tools and earns no commission. Placements backed by a single chart are flagged as such, and every comparison ends the same way: verify on a sample part before switching.

Grade charts by brand

Ask the AI advisor about MC7020
Cutting data for your material, when MC7020 is the right call versus its equivalents, and what to check before switching — answered with verified reference data plus live search. Edit the question and hit Ask — 3 free answers a day, no account.
Cost check · free · brand-neutral

Are you overpaying on your MC7020 inserts? Paste your insert list and get a cost audit in about 30 seconds: cross-brand candidate alternatives at the same ISO application position, and where you are likely overpaying. No signup, no sales call.

Run a free cost audit → Check your whole grade list · free

After the free check: a sourced PDF + XLSX report from EUR 9 for one grade. How buying works

Related grades

Where MC7020 is used: designations and materials