Carbide grade · Seco · ISO M
Seco TM3501
TM3501 is a Seco carbide insert grade (Coated), applied in the ISO M area. Its ISO position comes from the manufacturer grade comparison charts in this reference. 1 Direct peer is from other makers, listed in the same row of a manufacturer comparison chart. This is chart comparability, not verified cutting performance. 59 more grades share an ISO position only and are not verified. Same position is not the same performance: verify on a sample part before switching.
Grade summary
- Brand
- Seco
- Coating / substrate
- Coated
- ISO application area
- M — stainless steel
- ISO position (manufacturer charts)
- M30
Cross-brand alternatives (manufacturer charts)
Direct peers
Listed in the same row of a manufacturer comparison chart. This is chart comparability, not verified cutting performance.
- Sandvik GC2035 ISO M30 · 2 charts (Ingersoll, Tungaloy)
Same ISO position, not verified
These grades overlap in ISO position only. No manufacturer chart lists them together, and operation and tool material are not verified.
- Kennametal KC725M ISO M30 · not verified
- Kennametal KC735M ISO M30 · not verified
- Kyocera CA6535 ISO M30 · not verified
- Mitsubishi MP7030 ISO M30 · not verified
- Mitsubishi MP7130 ISO M30 · not verified
54 more not shown.
The best-evidenced alternative to Seco TM3501 from another maker, with published cutting speeds (sourced, and compared only where both makers publish them for the same conditions), coating and what would decide a switch. Usually in your inbox within 30 minutes.
Check Seco TM3501 against the published chart evidence first. If this grade has a documented candidate, you can order an automatically generated report for one grade (about US$10, charged EUR 9), or add up to two grades (about US$24, charged EUR 22). Currency conversion and tax at checkout may change the USD amount. A chart comparison is not a guaranteed substitute.
Check this grade and see the report →Compare TM3501 side by side
Frequently asked questions
What is Seco TM3501?
TM3501 is a Seco carbide insert grade (Coated), applied in the ISO M area, as positioned in manufacturer grade charts.
Which grades are direct peers of TM3501?
1 grade from another maker is listed in the same row of a manufacturer comparison chart as TM3501: Sandvik GC2035. This is chart comparability, not verified cutting performance. Grades that share only the ISO position are listed separately as not verified. Same position is not the same performance: verify on a sample part before switching.
Does this cross-reference favour specific brands?
No. Comparable grades appear here only because manufacturer-published comparison charts place them at the same ISO application position. No manufacturer pays for placement, nothing on this page is sponsored, and CuttingToolsAI sells no tools and earns no commission. Placements backed by a single chart are flagged as such, and every comparison ends the same way: verify on a sample part before switching.
Grade charts by brand
Are you overpaying on your TM3501 inserts? Paste your insert list and get a cost audit in about 30 seconds: cross-brand candidate alternatives at the same ISO application position, and where you are likely overpaying. No signup, no sales call.
After the free check: a sourced PDF + XLSX report from EUR 9 for one grade. How buying works
Related grades
Where TM3501 is used: designations and materials