Carbide grade · Seco · ISO P
Seco TP1501
TP1501 is a Seco carbide insert grade (Coated), applied in the ISO P area. Its ISO position comes from the manufacturer grade comparison charts in this reference. 3 Direct peers are from other makers, listed in the same row of a manufacturer comparison chart. This is chart comparability, not verified cutting performance. 75 more grades share an ISO position only and are not verified. Same position is not the same performance: verify on a sample part before switching.
Grade summary
- Brand
- Seco
- Coating / substrate
- Coated
- ISO application area
- P — steel
- ISO position (manufacturer charts)
- P10 · P15
Cross-brand alternatives (manufacturer charts)
Direct peers
Listed in the same row of a manufacturer comparison chart. This is chart comparability, not verified cutting performance.
Same ISO position, not verified
These grades overlap in ISO position only. No manufacturer chart lists them together, and operation and tool material are not verified.
- Mitsubishi NX2525 ISO P10 P15 · not verified · cermet
- Kyocera PV710 ISO P10 · not verified · cermet
- Mitsubishi MS6015 ISO P10 · not verified
- Kennametal KC515M ISO P10 · not verified
- ISCAR IC907 ISO P10 P15 · not verified
70 more not shown.
The best-evidenced alternative to Seco TP1501 from another maker, with published cutting speeds (sourced, and compared only where both makers publish them for the same conditions), coating and what would decide a switch. Usually in your inbox within 30 minutes.
Check Seco TP1501 against the published chart evidence first. If this grade has a documented candidate, you can order an automatically generated report for one grade (about US$10, charged EUR 9), or add up to two grades (about US$24, charged EUR 22). Currency conversion and tax at checkout may change the USD amount. A chart comparison is not a guaranteed substitute.
Check this grade and see the report →Compare TP1501 side by side
Frequently asked questions
What is Seco TP1501?
TP1501 is a Seco carbide insert grade (Coated), applied in the ISO P area, as positioned in manufacturer grade charts.
Which grades are direct peers of TP1501?
3 grades from other makers are listed in the same row of a manufacturer comparison chart as TP1501: Walter WPP10S, Sandvik GC4315, Sandvik GC4415. This is chart comparability, not verified cutting performance. Grades that share only the ISO position are listed separately as not verified. Same position is not the same performance: verify on a sample part before switching.
Does this cross-reference favour specific brands?
No. Comparable grades appear here only because manufacturer-published comparison charts place them at the same ISO application position. No manufacturer pays for placement, nothing on this page is sponsored, and CuttingToolsAI sells no tools and earns no commission. Placements backed by a single chart are flagged as such, and every comparison ends the same way: verify on a sample part before switching.
Grade charts by brand
Are you overpaying on your TP1501 inserts? Paste your insert list and get a cost audit in about 30 seconds: cross-brand candidate alternatives at the same ISO application position, and where you are likely overpaying. No signup, no sales call.
After the free check: a sourced PDF + XLSX report from EUR 9 for one grade. How buying works
Related grades
Where TP1501 is used: designations and materials