Carbide grade · Seco · ISO P
Seco TP2000
TP2000 is a Seco carbide insert grade, applied in the ISO P area. Its ISO position comes from the manufacturer grade comparison charts in this reference. 1 Direct peer is from other makers, listed in the same row of a manufacturer comparison chart. This is chart comparability, not verified cutting performance. 94 more grades share an ISO position only and are not verified. Same position is not the same performance: verify on a sample part before switching.
Grade summary
- Brand
- Seco
- ISO application area
- P — steel
- ISO position (manufacturer charts)
- P20
Cross-brand alternatives (manufacturer charts)
Direct peers
Listed in the same row of a manufacturer comparison chart. This is chart comparability, not verified cutting performance.
- Sandvik GC4325 ISO P20 · 2 charts (Ingersoll, Tungaloy)
Same ISO position, not verified
These grades overlap in ISO position only. No manufacturer chart lists them together, and operation and tool material are not verified.
- Kennametal KC9125 ISO P20 · not verified
- Kyocera PV720 ISO P20 · not verified · cermet
- Kyocera TN620 ISO P20 · not verified · cermet
- Mitsubishi NX3035 ISO P20 · not verified
- Mitsubishi VP15TF ISO P20 · not verified · carbide
89 more not shown.
The best-evidenced alternative to Seco TP2000 from another maker, with published cutting speeds (sourced, and compared only where both makers publish them for the same conditions), coating and what would decide a switch. Usually in your inbox within 30 minutes.
Check Seco TP2000 against the published chart evidence first. If this grade has a documented candidate, you can order an automatically generated report for one grade (about US$10, charged EUR 9), or add up to two grades (about US$24, charged EUR 22). Currency conversion and tax at checkout may change the USD amount. A chart comparison is not a guaranteed substitute.
Check this grade and see the report →Compare TP2000 side by side
Frequently asked questions
What is Seco TP2000?
TP2000 is a Seco carbide insert grade, applied in the ISO P area, as positioned in manufacturer grade charts.
Which grades are direct peers of TP2000?
1 grade from another maker is listed in the same row of a manufacturer comparison chart as TP2000: Sandvik GC4325. This is chart comparability, not verified cutting performance. Grades that share only the ISO position are listed separately as not verified. Same position is not the same performance: verify on a sample part before switching.
Does this cross-reference favour specific brands?
No. Comparable grades appear here only because manufacturer-published comparison charts place them at the same ISO application position. No manufacturer pays for placement, nothing on this page is sponsored, and CuttingToolsAI sells no tools and earns no commission. Placements backed by a single chart are flagged as such, and every comparison ends the same way: verify on a sample part before switching.
Grade charts by brand
Are you overpaying on your TP2000 inserts? Paste your insert list and get a cost audit in about 30 seconds: cross-brand candidate alternatives at the same ISO application position, and where you are likely overpaying. No signup, no sales call.
After the free check: a sourced PDF + XLSX report from EUR 9 for one grade. How buying works
Related grades
Where TP2000 is used: designations and materials