CUTTINGTOOLS / AI
Find equivalents

Carbide grade · Seco · ISO P

Seco TP2501

TP2501 is a Seco carbide insert grade (Coated), applied in the ISO P area. Its ISO position comes from the manufacturer grade comparison charts in this reference. 10 Direct peers are from other makers, listed in the same row of a manufacturer comparison chart. This is chart comparability, not verified cutting performance. 91 more grades share an ISO position only and are not verified. Same position is not the same performance: verify on a sample part before switching.

Same ISO position in the manufacturer charts, with the source on the full page. Running several grades? Separate them with commas to check the whole list. No signup.

Every maker's AI recommends its own tools. Ours compares all makers and shows the published source behind each answer, or tells you it could not verify.

Grade summary

Brand
Seco
Coating / substrate
Coated
ISO application area
P — steel
ISO position (manufacturer charts)
P20 · P25

Cross-brand alternatives (manufacturer charts)

Direct peers

Listed in the same row of a manufacturer comparison chart. This is chart comparability, not verified cutting performance.

  • ISCAR IC8250 ISO P20 P25 · 2+ independent charts (Mitsubishi Materials, TaeguTec)
  • Mitsubishi MC6025 ISO P20 P25 · 2+ independent charts (Mitsubishi Materials, TaeguTec)
  • Kennametal KCP25B ISO P20 P25 · 2+ independent charts (Mitsubishi Materials, TaeguTec)
  • Tungaloy T9225 ISO P20 P25 · 1 chart (TaeguTec)
  • Korloy NC3225 ISO P20 · 1 chart (TaeguTec)
  • Sandvik GC4425 ISO P20 P25 · 2 charts (Ingersoll, Tungaloy)
  • TaeguTec TT8125B ISO P20 P25 · 1 chart (TaeguTec)
  • Walter WPP20S ISO P20 P25 · 1 chart (TaeguTec)
  • Sandvik GC4325 ISO P20 P25 · 2 charts (Ingersoll, Tungaloy)
  • Ceratizit CTPM125 ISO P20 · 1 chart (Reliable Industrial Supply)

Same ISO position, not verified

These grades overlap in ISO position only. No manufacturer chart lists them together, and operation and tool material are not verified.

  • Kyocera PR1725 ISO P20 P25 · not verified
  • Kennametal KC9125 ISO P20 · not verified
  • ISCAR IC908 ISO P20 P25 · not verified
  • Kennametal KCU25 ISO P20 P25 · not verified
  • Kyocera CA025P ISO P20 P25 · not verified

64 more not shown.

More wear-resistant alternatives

Positioned below this grade on the ISO scale (more wear resistance, less toughness). ISO position only, not verified.

  • Sumitomo AC8020P ISO P20 · not verified · carbide
  • NTK CP7 ISO P20 · not verified
  • Tungaloy T9215 ISO P20 · not verified
  • NTK DM4 ISO P20 · not verified
  • Tungaloy J9530 ISO P20 · not verified

11 more not shown.

Different tool material

Recorded as a different tool material (for example cermet against carbide). Shown for reference only.

  • Kyocera PV720 ISO P20 · not verified · cermet
  • Sumitomo T2500Z ISO P20 · not verified · cermet
  • Kyocera TN620 ISO P20 · not verified · cermet
  • Mitsubishi NX2525 ISO P20 · not verified · cermet
  • Sumitomo T1500Z ISO P20 · not verified · cermet

1 more not shown.

Check TP2501 with your other grades →

Free · engineer's note · by email

The best-evidenced alternative to Seco TP2501 from another maker, with published cutting speeds (sourced, and compared only where both makers publish them for the same conditions), coating and what would decide a switch. Usually in your inbox within 30 minutes.

Source-backed grade report · PDF + XLSX

Check Seco TP2501 against the published chart evidence first. If this grade has a documented candidate, you can order an automatically generated report for one grade (about US$10, charged EUR 9), or add up to two grades (about US$24, charged EUR 22). Currency conversion and tax at checkout may change the USD amount. A chart comparison is not a guaranteed substitute.

Check this grade and see the report →

Frequently asked questions

What is Seco TP2501?

TP2501 is a Seco carbide insert grade (Coated), applied in the ISO P area, as positioned in manufacturer grade charts.

Which grades are direct peers of TP2501?

10 grades from other makers are listed in the same row of a manufacturer comparison chart as TP2501: ISCAR IC8250, Mitsubishi MC6025, Kennametal KCP25B, Tungaloy T9225, Korloy NC3225, Sandvik GC4425, TaeguTec TT8125B, Walter WPP20S, Sandvik GC4325, Ceratizit CTPM125. This is chart comparability, not verified cutting performance. Grades that share only the ISO position are listed separately as not verified. Same position is not the same performance: verify on a sample part before switching.

Does this cross-reference favour specific brands?

No. Comparable grades appear here only because manufacturer-published comparison charts place them at the same ISO application position. No manufacturer pays for placement, nothing on this page is sponsored, and CuttingToolsAI sells no tools and earns no commission. Placements backed by a single chart are flagged as such, and every comparison ends the same way: verify on a sample part before switching.

Grade charts by brand

Ask the AI advisor about TP2501
Cutting data for your material, when TP2501 is the right call versus its equivalents, and what to check before switching — answered with verified reference data plus live search. Edit the question and hit Ask — 3 free answers a day, no account.
Cost check · free · brand-neutral

Are you overpaying on your TP2501 inserts? Paste your insert list and get a cost audit in about 30 seconds: cross-brand candidate alternatives at the same ISO application position, and where you are likely overpaying. No signup, no sales call.

Run a free cost audit → Check your whole grade list · free

After the free check: a sourced PDF + XLSX report from EUR 9 for one grade. How buying works

Related grades

Where TP2501 is used: designations and materials