Insert cross-reference · 35° Rhombic · 5° clearance · 16mm IC · 0.8mm Rε
VBMT160408 Cross Reference / ANSI VBMT 332
Equivalent VBMT160408 inserts across 7 brands — Sandvik, ISCAR, Kennametal, Walter, Tungaloy, Seco, Mitsubishi. In US (inch, ANSI B212.4) catalogs this same insert is listed as VBMT 332 — identical geometry, different designation system. Same ISO 1832 geometry class; grades, coatings and application windows differ by manufacturer. Treat equivalents as starting points and verify on a sample part: a cross-reference matches the geometry, not the process.
A general-purpose nose radius: a balance of edge strength and finish that suits most first-choice turning before you tune up for finishing or down for roughing.
Brand equivalents — VBMT160408
| Brand | Designation / grade | Coating | Application |
|---|---|---|---|
| Sandvik | VBMT 16 04 08-MF 4315 | Inveio® CVD | P10–P20 |
| ISCAR | VBMT160408 IC8150 | SUMO TEC® CVD Al₂O₃ | P10–P20 |
| Kennametal | VBMT160408 KCP10B | KENGold™ CVD | P10–P20 |
| Walter | VBMT160408 WPP10S | Tiger·tec® Silver CVD | P10–P20 |
| Tungaloy | VBMT160408 T9115 | CVD TiCN/Al₂O₃ | P10–P20 |
| Seco | VBMT160408 TP1500 | Duratomic® CVD | P10–P20 |
| Mitsubishi | VBMT160408 MC6015 | CVD Al₂O₃ | P10–P20 |
Grades used Sandvik GC4315 · ISCAR IC8150 · Kennametal KCP10B · Walter WPP10S · Tungaloy T9115 · Seco TP1500 · Mitsubishi MC6015
18 brands list VBMT160408 in their published standard programs, with 867 catalog variants across chipbreakers, grades and coatings. Variant count shows how deep each maker's standard range goes for this geometry. It is not a quality ranking.
| Brand | Catalog variants |
|---|---|
| Sumitomo | 152 |
| Sandvik-Coromant | 113 |
| Kyocera | 101 |
| Mitsubishi Materials | 78 |
| SECO Tools | 66 |
| Ingersoll | 65 |
| Korloy | 60 |
| Widia | 43 |
| Hoffmann Group | 39 |
| Walter | 39 |
| Kennametal | 34 |
| ZCC Cutting Tools | 28 |
| Tungaloy | 24 |
| Boehlerit | 7 |
| Ceramtec | 7 |
| Mapal | 6 |
| Hahn+Kolb | 3 |
| Komet Group | 2 |
Hoffmann Group and Hahn+Kolb are distributor private-label programs (GARANT, ATORN). Counts are catalog listings, not stock levels. Availability varies by region and distributor.
ISO designation decoded — what VBMT160408 means
- V — shape
- 35° rhombic (diamond)
- B — clearance angle
- relief angle 5°
- M — tolerance
- class M — molded, medium tolerance on inscribed circle and corner point (typically ±0.05–0.13 mm depending on size)
- T — type
- fixing hole with countersink, chipbreaker on one face (single-sided positive insert)
- 16 — cutting edge length / IC
- 16 mm nominal (inscribed circle / edge length class)
- 04 — thickness
- insert thickness 4.76 mm
- 08 — corner radius
- Rε = 0.8 mm nose radius
Cross-reference a grade at its ISO position
Type any maker's grade (e.g. GC4325, AC820P, T9215) to see grades other brands publish at the same ISO application position. VERIFIED = multi-source consensus; 2+ CHARTS = placement confirmed by two or more manufacturer-published charts; SINGLE-SOURCE = one chart only. Comparable at ISO position — not identical performance. Verify on a sample part.
Frequently asked questions
What does VBMT160408 mean?
VBMT160408 is an ISO 1832 insert designation. It decodes as: V — shape = 35° rhombic (diamond); B — clearance angle = relief angle 5°; M — tolerance = class M — molded, medium tolerance on inscribed circle and corner point (typically ±0.05–0.13 mm depending on size); T — type = fixing hole with countersink, chipbreaker on one face (single-sided positive insert); 16 — cutting edge length / IC = 16 mm nominal (inscribed circle / edge length class); 04 — thickness = insert thickness 4.76 mm; 08 — corner radius = Rε = 0.8 mm nose radius.
What is VBMT160408 used for?
VBMT160408 is a turning insert. The brand-equivalents table on this page lists each maker's grade and its ISO application window (the P, M, K and similar ranges). Match the geometry first, then choose the grade for your material and operation, and verify on a sample part.
What is the equivalent of VBMT160408 across brands?
VBMT160408 is a shared ISO 1832 geometry, so Sandvik, ISCAR, Kennametal, Walter and other makers each offer it in their own grades and coatings. A cross-reference matches the geometry, not the process, so treat equivalents as starting points and verify on a sample part.
Is VBMT160408 a positive insert?
VBMT160408 has positive clearance, so it is a positive, single-sided insert: lower cutting forces, suited to finishing, small parts and low-rigidity setups.
Does this cross-reference favour specific brands?
No. Comparable grades appear here only because manufacturer-published comparison charts place them at the same ISO application position. No manufacturer pays for placement, nothing on this page is sponsored, and CuttingToolsAI sells no tools and earns no commission. Placements backed by a single chart are flagged as such, and every comparison ends the same way: verify on a sample part before switching.
Are you overpaying on your VBMT160408 inserts? Paste your insert list and get a cost audit in about 30 seconds: cross-brand equivalents at the same ISO application position, and where you are likely overpaying. No signup, no sales call.
Related designations