Carbide grade · Tungaloy · ISO P/M/K/S
Tungaloy GH110
GH110 is a Tungaloy carbide insert grade (Coated), applied in the ISO P/M/K/S areas. Its ISO position comes from the manufacturer grade comparison charts in this reference. No manufacturer chart on file lists a direct peer for it. 142 grades from other makers share an ISO position with it. None has been verified. Same position is not the same performance: verify on a sample part before switching.
Grade summary
- Brand
- Tungaloy
- Coating / substrate
- Coated
- ISO application area
- P — steel · M — stainless steel · K — cast iron · S — superalloys & titanium
- ISO position (manufacturer charts)
- K10 · M15 · P10 · S15
Cross-brand alternatives (manufacturer charts)
Direct peers
Listed in the same row of a manufacturer comparison chart. This is chart comparability, not verified cutting performance.
No manufacturer chart on file lists a direct peer for this grade. Grades at the same ISO position are listed as not verified.
Same ISO position, not verified
These grades overlap in ISO position only. No manufacturer chart lists them together, and operation and tool material are not verified.
- Kennametal KCU10 ISO K10 P10 S15 · not verified
- Mitsubishi NX2525 ISO K10 P10 · not verified · cermet
- Kennametal KC515M ISO K10 P10 · not verified
- Mitsubishi VP25N ISO K10 P10 · not verified
- ISCAR IC5010 ISO K10 · not verified
137 more not shown.
The best-evidenced alternative to Tungaloy GH110 from another maker, with published cutting speeds (sourced, and compared only where both makers publish them for the same conditions), coating and what would decide a switch. Usually in your inbox within 30 minutes.
Check Tungaloy GH110 against the published chart evidence first. If this grade has a documented candidate, you can order an automatically generated report for one grade (about US$10, charged EUR 9), or add up to two grades (about US$24, charged EUR 22). Currency conversion and tax at checkout may change the USD amount. A chart comparison is not a guaranteed substitute.
Check this grade and see the report →Compare GH110 side by side
Frequently asked questions
What is Tungaloy GH110?
GH110 is a Tungaloy carbide insert grade (Coated), applied in the ISO P/M/K/S areas, as positioned in manufacturer grade charts.
Does this cross-reference favour specific brands?
No. Comparable grades appear here only because manufacturer-published comparison charts place them at the same ISO application position. No manufacturer pays for placement, nothing on this page is sponsored, and CuttingToolsAI sells no tools and earns no commission. Placements backed by a single chart are flagged as such, and every comparison ends the same way: verify on a sample part before switching.
Grade charts by brand
Are you overpaying on your GH110 inserts? Paste your insert list and get a cost audit in about 30 seconds: cross-brand candidate alternatives at the same ISO application position, and where you are likely overpaying. No signup, no sales call.
After the free check: a sourced PDF + XLSX report from EUR 9 for one grade. How buying works
Related grades
Where GH110 is used: designations and materials