Carbide grade · Tungaloy · ISO S
Tungaloy AH645
AH645 is a Tungaloy carbide insert grade, applied in the ISO S area. Its ISO position comes from the manufacturer grade comparison charts in this reference. 1 Direct peer is from other makers, listed in the same row of a manufacturer comparison chart. This is chart comparability, not verified cutting performance. 23 more grades share an ISO position only and are not verified. Same position is not the same performance: verify on a sample part before switching.
Grade summary
- Brand
- Tungaloy
- ISO application area
- S — superalloys & titanium
- ISO position (manufacturer charts)
- S20
Cross-brand alternatives (manufacturer charts)
Direct peers
Listed in the same row of a manufacturer comparison chart. This is chart comparability, not verified cutting performance.
- Sandvik GC1125 ISO S20 · 2 charts (Ingersoll, Tungaloy)
Same ISO position, not verified
These grades overlap in ISO position only. No manufacturer chart lists them together, and operation and tool material are not verified.
- Sandvik H10F ISO S20 · not verified
- Korloy PC5300 ISO S20 · not verified
- Mitsubishi MP9025 ISO S20 · not verified
- Seco CP500 ISO S20 · not verified
- Walter WSM20S ISO S20 · not verified
18 more not shown.
The best-evidenced alternative to Tungaloy AH645 from another maker, with published cutting speeds (sourced, and compared only where both makers publish them for the same conditions), coating and what would decide a switch. Usually in your inbox within 30 minutes.
Check Tungaloy AH645 against the published chart evidence first. If this grade has a documented candidate, you can order an automatically generated report for one grade (about US$10, charged EUR 9), or add up to two grades (about US$24, charged EUR 22). Currency conversion and tax at checkout may change the USD amount. A chart comparison is not a guaranteed substitute.
Check this grade and see the report →Compare AH645 side by side
Frequently asked questions
What is Tungaloy AH645?
AH645 is a Tungaloy carbide insert grade, applied in the ISO S area, as positioned in manufacturer grade charts.
Which grades are direct peers of AH645?
1 grade from another maker is listed in the same row of a manufacturer comparison chart as AH645: Sandvik GC1125. This is chart comparability, not verified cutting performance. Grades that share only the ISO position are listed separately as not verified. Same position is not the same performance: verify on a sample part before switching.
Does this cross-reference favour specific brands?
No. Comparable grades appear here only because manufacturer-published comparison charts place them at the same ISO application position. No manufacturer pays for placement, nothing on this page is sponsored, and CuttingToolsAI sells no tools and earns no commission. Placements backed by a single chart are flagged as such, and every comparison ends the same way: verify on a sample part before switching.
Grade charts by brand
Are you overpaying on your AH645 inserts? Paste your insert list and get a cost audit in about 30 seconds: cross-brand candidate alternatives at the same ISO application position, and where you are likely overpaying. No signup, no sales call.
After the free check: a sourced PDF + XLSX report from EUR 9 for one grade. How buying works
Related grades
Where AH645 is used: designations and materials