Carbide grade · Mitsubishi · ISO M
Mitsubishi MC7025
MC7025 is a Mitsubishi carbide insert grade (CVD), applied in the ISO M area. In this cross-reference it appears on 1 insert designation; the same insert geometry is also made by ISCAR, Kennametal, Sandvik, Seco, Walter. 5 grades from other makers are confirmed at the same ISO position by two or more manufacturer charts. Same position is not the same performance: verify on a sample part before switching.
Newer grade listed by the maker
Mitsubishi lists Mitsubishi MC7125 against MC7025 in its own documents. That is a maker-stated successor, not a discontinuation notice: see the source and what to check before switching →
Grade summary
- Brand
- Mitsubishi
- Coating / substrate
- CVD
- ISO application area
- M — stainless steel
- Application range (catalog)
- M15–M25
- Used in
- 1 insert designation in this reference
Cross-brand equivalents (manufacturer charts)
| Brand | Grade | Shared ISO positions | Status |
|---|---|---|---|
| Kyocera | CA6535 | M20 M30 | Confirmed (2+ charts) |
| Kyocera | PR1225 | M20 M30 | Confirmed (2+ charts) |
| Kyocera | PR1525 | M20 M30 | Confirmed (2+ charts) |
| NTK | DM4 | M20 M30 | Confirmed (2+ charts) |
| NTK | DT4 | M20 M30 | Confirmed (2+ charts) |
| Ceratizit | CTCM130 | M20 M30 | Lead (one chart or partial overlap), not a recommendation |
| Dijet | JC5015 | M20 M30 | Lead (one chart or partial overlap), not a recommendation |
| Ceratizit | CTCM120 | M20 | Lead (one chart or partial overlap), not a recommendation |
| Dijet | JC8015 | M20 | Lead (one chart or partial overlap), not a recommendation |
| ISCAR | IC908 | M30 | Lead (one chart or partial overlap), not a recommendation |
The best-evidenced alternative to Mitsubishi MC7025 from another maker, with published cutting speeds (sourced, and compared only where both makers publish them for the same conditions), coating and what would decide a switch. Usually in your inbox within 30 minutes.
Mitsubishi MC7025 plus up to two grades you run next to it, worked through in one document: every cross-brand match with the number of manufacturer charts behind it, single-source candidates kept apart, where your grades overlap so the list can be shortened, and a validation plan. Emailed to you, usually within the hour. No account needed.
Same insert geometry, other brands
These makers produce the same insert designation in their own grade. Shared geometry is not a grade equivalence.
| Brand | Grade | Coating | Shared designations |
|---|---|---|---|
| ISCAR | IC6025 | SUMO TEC® CVD | SCMT09T308 |
| Kennametal | KCM25B | MT-CVD TiCN/Al₂O₃ | SCMT09T308 |
| Sandvik | GC2220 | MT-CVD TiCN/Al₂O₃ | SCMT09T308 |
| Seco | TM2501 | Duratomic® CVD | SCMT09T308 |
| Walter | WSM20S | Tiger·tec® Silver PVD | SCMT09T308 |
Compare MC7025 side by side
Insert designations using MC7025
| Designation | Geometry | Catalog code | Application |
|---|---|---|---|
| SCMT09T308 | 90° Square · 7° clearance (positive) · 0.8mm Rε | SCMT09T308 MC7025 | M15–M25 |
Frequently asked questions
What is Mitsubishi MC7025?
MC7025 is a Mitsubishi carbide insert grade (CVD), applied in the ISO M area, used in 1 insert designation in this reference.
Which grades are comparable to MC7025?
Grades from other makers confirmed at the same ISO application position by two or more manufacturer charts include Kyocera CA6535, Kyocera PR1225, Kyocera PR1525, NTK DM4, NTK DT4. Same position is not the same performance: treat them as starting points and verify on a sample part before switching.
Does this cross-reference favour specific brands?
No. Comparable grades appear here only because manufacturer-published comparison charts place them at the same ISO application position. No manufacturer pays for placement, nothing on this page is sponsored, and CuttingToolsAI sells no tools and earns no commission. Placements backed by a single chart are flagged as such, and every comparison ends the same way: verify on a sample part before switching.
Grade charts by brand
Are you overpaying on your MC7025 inserts? Paste your insert list and get a cost audit in about 30 seconds: cross-brand equivalents at the same ISO application position, and where you are likely overpaying. No signup, no sales call.
Related grades
Where MC7025 is used: designations and materials