CUTTINGTOOLS / AI
Find equivalents

Carbide grade · Sandvik · ISO M

Sandvik GC2025

GC2025 is a Sandvik carbide insert grade (Coated), applied in the ISO M area. Its ISO position comes from the manufacturer grade comparison charts in this reference. 9 Direct peers are from other makers, listed in the same row of a manufacturer comparison chart. This is chart comparability, not verified cutting performance. 49 more grades share an ISO position only and are not verified. Same position is not the same performance: verify on a sample part before switching.

Same ISO position in the manufacturer charts, with the source on the full page. Running several grades? Separate them with commas to check the whole list. No signup.

Every maker's AI recommends its own tools. Ours compares all makers and shows the published source behind each answer, or tells you it could not verify.

Grade summary

Brand
Sandvik
Coating / substrate
Coated
ISO application area
M — stainless steel
ISO position (manufacturer charts)
M20

Cross-brand alternatives (manufacturer charts)

Direct peers

Listed in the same row of a manufacturer comparison chart. This is chart comparability, not verified cutting performance.

  • Kennametal KCM25 ISO M20 · 2+ independent charts (Ingersoll, TaeguTec, Tungaloy)
  • TaeguTec TT9225 ISO M20 · 2+ independent charts (Ingersoll, TaeguTec, Tungaloy)
  • ISCAR IC6025 ISO M20 · 1 chart (Ingersoll)
  • Seco TM2501 ISO M20 · 2 charts (Ingersoll, Tungaloy)
  • Mitsubishi MC7025 ISO M20 · 3 charts (Ingersoll, TaeguTec, Tungaloy)
  • Seco CP500 ISO M20 · 2 charts (Ingersoll, Tungaloy)
  • Ceratizit CTCM130 ISO M20 · 1 chart (Tungaloy)
  • Tungaloy AH6225 ISO M20 · 1 chart (Ingersoll)
  • Mitsubishi US735 ISO M30 M40 · 3 charts (Ingersoll, TaeguTec, Tungaloy)

Same ISO position, not verified

These grades overlap in ISO position only. No manufacturer chart lists them together, and operation and tool material are not verified.

  • Kennametal KC525M ISO M20 · not verified
  • Kennametal KCM25B ISO M20 · not verified
  • Kyocera CA6525 ISO M20 · not verified
  • Kyocera PR1225 ISO M20 · not verified · carbide
  • ISCAR IC07 ISO M20 · not verified

44 more not shown.

Check GC2025 with your other grades →

Free · engineer's note · by email

The best-evidenced alternative to Sandvik GC2025 from another maker, with published cutting speeds (sourced, and compared only where both makers publish them for the same conditions), coating and what would decide a switch. Usually in your inbox within 30 minutes.

Source-backed grade report · PDF + XLSX

Check Sandvik GC2025 against the published chart evidence first. If this grade has a documented candidate, you can order an automatically generated report for one grade (about US$10, charged EUR 9), or add up to two grades (about US$24, charged EUR 22). Currency conversion and tax at checkout may change the USD amount. A chart comparison is not a guaranteed substitute.

Check this grade and see the report →

Frequently asked questions

What is Sandvik GC2025?

GC2025 is a Sandvik carbide insert grade (Coated), applied in the ISO M area, as positioned in manufacturer grade charts.

Which grades are direct peers of GC2025?

9 grades from other makers are listed in the same row of a manufacturer comparison chart as GC2025: Kennametal KCM25, TaeguTec TT9225, ISCAR IC6025, Seco TM2501, Mitsubishi MC7025, Seco CP500, Ceratizit CTCM130, Tungaloy AH6225, Mitsubishi US735. This is chart comparability, not verified cutting performance. Grades that share only the ISO position are listed separately as not verified. Same position is not the same performance: verify on a sample part before switching.

Does this cross-reference favour specific brands?

No. Comparable grades appear here only because manufacturer-published comparison charts place them at the same ISO application position. No manufacturer pays for placement, nothing on this page is sponsored, and CuttingToolsAI sells no tools and earns no commission. Placements backed by a single chart are flagged as such, and every comparison ends the same way: verify on a sample part before switching.

Grade charts by brand

Ask the AI advisor about GC2025
Cutting data for your material, when GC2025 is the right call versus its equivalents, and what to check before switching — answered with verified reference data plus live search. Edit the question and hit Ask — 3 free answers a day, no account.
Cost check · free · brand-neutral

Are you overpaying on your GC2025 inserts? Paste your insert list and get a cost audit in about 30 seconds: cross-brand candidate alternatives at the same ISO application position, and where you are likely overpaying. No signup, no sales call.

Run a free cost audit → Check your whole grade list · free

After the free check: a sourced PDF + XLSX report from EUR 9 for one grade. How buying works

Related grades

Where GC2025 is used: designations and materials