CUTTINGTOOLS / AI
Find equivalents

Carbide grade · Tungaloy · ISO P/K/S

Tungaloy KS15F

KS15F is a Tungaloy carbide insert grade (Uncoated), applied in the ISO P/K/S areas. Its ISO position comes from the manufacturer grade comparison charts in this reference. No manufacturer chart on file lists a direct peer for it. 175 grades from other makers share an ISO position with it. None has been verified. Same position is not the same performance: verify on a sample part before switching.

Same ISO position in the manufacturer charts, with the source on the full page. Running several grades? Separate them with commas to check the whole list. No signup.

Every maker's AI recommends its own tools. Ours compares all makers and shows the published source behind each answer, or tells you it could not verify.

Grade summary

Brand
Tungaloy
Coating / substrate
Uncoated
ISO application area
P — steel · K — cast iron · S — superalloys & titanium
ISO position (manufacturer charts)
K15 · K20 · P30 · S15 · S20

Cross-brand alternatives (manufacturer charts)

Direct peers

Listed in the same row of a manufacturer comparison chart. This is chart comparability, not verified cutting performance.

No manufacturer chart on file lists a direct peer for this grade. Grades at the same ISO position are listed as not verified.

Same ISO position, not verified

These grades overlap in ISO position only. No manufacturer chart lists them together, and operation and tool material are not verified.

  • Mitsubishi VP15TF ISO K20 P30 S20 · not verified · carbide
  • Mitsubishi VP20RT ISO K20 P30 · not verified
  • ISCAR IC908 ISO K20 S20 · not verified
  • Kyocera PR1535 ISO P30 S20 · not verified · carbide
  • Mitsubishi UTi20T ISO K20 P30 · not verified

161 more not shown.

Tougher alternatives

Positioned above this grade on the ISO scale (more toughness, less wear resistance). ISO position only, not verified.

  • Kennametal KC524M ISO K20 · not verified
  • Walter WSM30S ISO S20 · not verified
  • Kyocera PR1510 ISO K20 · not verified
  • Mitsubishi MBS140 ISO K20 · not verified
  • Seco 883 ISO K20 · not verified

2 more not shown.

More wear-resistant alternatives

Positioned below this grade on the ISO scale (more wear resistance, less toughness). ISO position only, not verified.

Check KS15F with your other grades →

Free · engineer's note · by email

The best-evidenced alternative to Tungaloy KS15F from another maker, with published cutting speeds (sourced, and compared only where both makers publish them for the same conditions), coating and what would decide a switch. Usually in your inbox within 30 minutes.

Source-backed grade report · PDF + XLSX

Check Tungaloy KS15F against the published chart evidence first. If this grade has a documented candidate, you can order an automatically generated report for one grade (about US$10, charged EUR 9), or add up to two grades (about US$24, charged EUR 22). Currency conversion and tax at checkout may change the USD amount. A chart comparison is not a guaranteed substitute.

Check this grade and see the report →

Frequently asked questions

What is Tungaloy KS15F?

KS15F is a Tungaloy carbide insert grade (Uncoated), applied in the ISO P/K/S areas, as positioned in manufacturer grade charts.

Does this cross-reference favour specific brands?

No. Comparable grades appear here only because manufacturer-published comparison charts place them at the same ISO application position. No manufacturer pays for placement, nothing on this page is sponsored, and CuttingToolsAI sells no tools and earns no commission. Placements backed by a single chart are flagged as such, and every comparison ends the same way: verify on a sample part before switching.

Grade charts by brand

Ask the AI advisor about KS15F
Cutting data for your material, when KS15F is the right call versus its equivalents, and what to check before switching — answered with verified reference data plus live search. Edit the question and hit Ask — 3 free answers a day, no account.
Cost check · free · brand-neutral

Are you overpaying on your KS15F inserts? Paste your insert list and get a cost audit in about 30 seconds: cross-brand candidate alternatives at the same ISO application position, and where you are likely overpaying. No signup, no sales call.

Run a free cost audit → Check your whole grade list · free

After the free check: a sourced PDF + XLSX report from EUR 9 for one grade. How buying works

Related grades

Where KS15F is used: designations and materials