Carbide grade · Seco · ISO P
Seco TP2500
TP2500 is a Seco carbide insert grade (Duratomic® CVD), applied in the ISO P area. In this cross-reference it appears on 10 insert designations; the same insert geometry is also made by ISCAR, Kennametal, Mitsubishi, Sandvik, Tungaloy, Walter. 2 Direct peers are from other makers, listed in the same row of a manufacturer comparison chart. This is chart comparability, not verified cutting performance. 99 more grades share an ISO position only and are not verified. Same position is not the same performance: verify on a sample part before switching.
Grade summary
- Brand
- Seco
- Coating / substrate
- Duratomic® CVD
- ISO application area
- P — steel
- Application range (catalog)
- P20–P30
- Used in
- 10 insert designations in this reference
Cross-brand alternatives (manufacturer charts)
Direct peers
Listed in the same row of a manufacturer comparison chart. This is chart comparability, not verified cutting performance.
Same ISO position, not verified
These grades overlap in ISO position only. No manufacturer chart lists them together, and operation and tool material are not verified.
- Kyocera PR1225 ISO P20 P25 · not verified · carbide
- Kyocera PR1725 ISO P20 P25 · not verified
- Sumitomo AC1030U ISO P20 P25 · not verified · carbide
- Kennametal KC9125 ISO P20 · not verified
- ISCAR IC8250 ISO P20 P25 · not verified
73 more not shown.
More wear-resistant alternatives
Positioned below this grade on the ISO scale (more wear resistance, less toughness). ISO position only, not verified.
- Kyocera PV720 ISO P20 · not verified · cermet
- Kyocera TN620 ISO P20 · not verified · cermet
- Mitsubishi NX2525 ISO P20 · not verified · cermet
- NTK DM4 ISO P20 · not verified
- Sumitomo T1500A ISO P20 · not verified · cermet
16 more not shown.
The best-evidenced alternative to Seco TP2500 from another maker, with published cutting speeds (sourced, and compared only where both makers publish them for the same conditions), coating and what would decide a switch. Usually in your inbox within 30 minutes.
Check Seco TP2500 against the published chart evidence first. If this grade has a documented candidate, you can order an automatically generated report for one grade (about US$10, charged EUR 9), or add up to two grades (about US$24, charged EUR 22). Currency conversion and tax at checkout may change the USD amount. A chart comparison is not a guaranteed substitute.
Check this grade and see the report →Same insert geometry, other brands
These makers produce the same insert designation in their own grade. Shared geometry is not a grade equivalence.
| Brand | Grade | Coating | Shared designations |
|---|---|---|---|
| ISCAR | IC8250 | SUMO TEC® CVD Al₂O₃ | CNMG120404, CNMG120408, DNMG150604, DNMG150608, DNMG150612, SNMG120404, SNMG120408, SNMG120412, TNMG160408, TNMG160412 |
| Kennametal | KCP25B | KENGold™ CVD | CNMG120404, CNMG120408, DNMG150604, DNMG150608, DNMG150612, SNMG120404, SNMG120408, SNMG120412, TNMG160408, TNMG160412 |
| Mitsubishi | MC6025 | CVD Al₂O₃ | CNMG120404, CNMG120408, DNMG150604, DNMG150608, DNMG150612, SNMG120404, SNMG120408, SNMG120412, TNMG160408, TNMG160412 |
| Sandvik | GC4325 | Inveio® CVD Al₂O₃ | CNMG120404, CNMG120408, DNMG150604, DNMG150608, DNMG150612, SNMG120404, SNMG120408, SNMG120412, TNMG160408, TNMG160412 |
| Tungaloy | T9125 | CVD TiCN/Al₂O₃ | CNMG120404, CNMG120408, DNMG150604, DNMG150608, DNMG150612, SNMG120404, SNMG120408, SNMG120412, TNMG160408, TNMG160412 |
| Walter | WPP20S | Tiger·tec® Silver CVD | CNMG120404, CNMG120408, DNMG150604, DNMG150608, DNMG150612, SNMG120404, SNMG120408, SNMG120412, TNMG160408, TNMG160412 |
Compare TP2500 side by side
Insert designations using TP2500
| Designation | Geometry | Catalog code | Application |
|---|---|---|---|
| CNMG120404 | 80° Diamond · 0° clearance · 12mm IC · 0.4mm Rε (finishing) | CNMG120404 TP2500 | P20–P30 |
| CNMG120408 | 80° Diamond · 0° clearance · 12mm IC · 0.8mm Rε | CNMG120408 TP2500 | P20–P30 |
| DNMG150604 | 55° Diamond · 0° clearance · 15mm IC · 0.4mm Rε (finishing) | DNMG150604 TP2500 | P20–P30 |
| DNMG150608 | 55° Diamond · 0° clearance · 15mm IC · 0.8mm Rε | DNMG150608 TP2500 | P20–P30 |
| DNMG150612 | 55° Diamond · 0° clearance · 15mm IC · 1.2mm Rε (roughing) | DNMG150612 TP2500 | P20–P30 |
| SNMG120404 | 90° Square · 0° clearance · 12mm IC · 0.4mm Rε (finishing) | SNMG120404 TP2500 | P20–P30 |
| SNMG120408 | 90° Square · 0° clearance · 12mm IC · 0.8mm Rε | SNMG120408 TP2500 | P20–P30 |
| SNMG120412 | 90° Square · 0° clearance · 12mm IC · 1.2mm Rε (roughing) | SNMG120412 TP2500 | P20–P30 |
| TNMG160408 | 60° Triangle · 0° clearance · 16mm IC · 0.8mm Rε | TNMG160408 TP2500 | P20–P30 |
| TNMG160412 | 60° Triangle · 0° clearance · 16mm IC · 1.2mm Rε (roughing) | TNMG160412 TP2500 | P20–P30 |
Frequently asked questions
What is Seco TP2500?
TP2500 is a Seco carbide insert grade (Duratomic® CVD), applied in the ISO P area, used in 10 insert designations in this reference.
Which grades are direct peers of TP2500?
2 grades from other makers are listed in the same row of a manufacturer comparison chart as TP2500: Sandvik GC4425, Sandvik GC4325. This is chart comparability, not verified cutting performance. Grades that share only the ISO position are listed separately as not verified. Same position is not the same performance: verify on a sample part before switching.
Does this cross-reference favour specific brands?
No. Comparable grades appear here only because manufacturer-published comparison charts place them at the same ISO application position. No manufacturer pays for placement, nothing on this page is sponsored, and CuttingToolsAI sells no tools and earns no commission. Placements backed by a single chart are flagged as such, and every comparison ends the same way: verify on a sample part before switching.
Grade charts by brand
Are you overpaying on your TP2500 inserts? Paste your insert list and get a cost audit in about 30 seconds: cross-brand candidate alternatives at the same ISO application position, and where you are likely overpaying. No signup, no sales call.
After the free check: a sourced PDF + XLSX report from EUR 9 for one grade. How buying works
Related grades
Where TP2500 is used: designations and materials