Carbide grade · ISCAR · ISO P
ISCAR IC8250
IC8250 is a ISCAR carbide insert grade (SUMO TEC® CVD Al₂O₃), applied in the ISO P area. In this cross-reference it appears on 10 insert designations; the same insert geometry is also made by Kennametal, Mitsubishi, Sandvik, Seco, Tungaloy, Walter. 5 grades from other makers are confirmed at the same ISO position by two or more manufacturer charts. Same position is not the same performance: verify on a sample part before switching.
Grade summary
- Brand
- ISCAR
- Coating / substrate
- SUMO TEC® CVD Al₂O₃
- ISO application area
- P — steel
- Application range (catalog)
- P20–P30
- Used in
- 10 insert designations in this reference
Cross-brand equivalents (manufacturer charts)
| Brand | Grade | Shared ISO positions | Status |
|---|---|---|---|
| Kyocera | PR1225 | P20 P25 | Confirmed (2+ charts) |
| Kyocera | PR1725 | P20 P25 | Confirmed (2+ charts) |
| Sandvik | GC1525 | P20 P25 | Confirmed (2+ charts) |
| Sumitomo | AC1030U | P20 P25 | Confirmed (2+ charts) |
| Kennametal | KCP25B | P20 P25 | Confirmed (2+ charts) |
| Ceratizit | CTCP115 | P20 | Lead (one chart or partial overlap), not a recommendation |
| Ceratizit | CTCP125 | P20 | Lead (one chart or partial overlap), not a recommendation |
| Ceratizit | CTPM125 | P20 | Lead (one chart or partial overlap), not a recommendation |
| Dijet | CX75 | P20 | Lead (one chart or partial overlap), not a recommendation |
| Dijet | JC5015 | P25 | Lead (one chart or partial overlap), not a recommendation |
ISCAR IC8250 plus up to two grades you run next to it, worked through in one document: every cross-brand match with the number of manufacturer charts behind it, single-source candidates kept apart, where your grades overlap so the list can be shortened, and a validation plan. Emailed to you, usually within the hour. No account needed.
Same insert geometry, other brands
These makers produce the same insert designation in their own grade. Shared geometry is not a grade equivalence.
| Brand | Grade | Coating | Shared designations |
|---|---|---|---|
| Kennametal | KCP25B | KENGold™ CVD | CNMG120404, CNMG120408, DNMG150604, DNMG150608, DNMG150612, SNMG120404, SNMG120408, SNMG120412, TNMG160408, TNMG160412 |
| Mitsubishi | MC6025 | CVD Al₂O₃ | CNMG120404, CNMG120408, DNMG150604, DNMG150608, DNMG150612, SNMG120404, SNMG120408, SNMG120412, TNMG160408, TNMG160412 |
| Sandvik | GC4325 | Inveio® CVD Al₂O₃ | CNMG120404, CNMG120408, DNMG150604, DNMG150608, DNMG150612, SNMG120404, SNMG120408, SNMG120412, TNMG160408, TNMG160412 |
| Seco | TP2500 | Duratomic® CVD | CNMG120404, CNMG120408, DNMG150604, DNMG150608, DNMG150612, SNMG120404, SNMG120408, SNMG120412, TNMG160408, TNMG160412 |
| Tungaloy | T9125 | CVD TiCN/Al₂O₃ | CNMG120404, CNMG120408, DNMG150604, DNMG150608, DNMG150612, SNMG120404, SNMG120408, SNMG120412, TNMG160408, TNMG160412 |
| Walter | WPP20S | Tiger·tec® Silver CVD | CNMG120404, CNMG120408, DNMG150604, DNMG150608, DNMG150612, SNMG120404, SNMG120408, SNMG120412, TNMG160408, TNMG160412 |
Compare IC8250 side by side
Insert designations using IC8250
| Designation | Geometry | Catalog code | Application |
|---|---|---|---|
| CNMG120404 | 80° Diamond · 0° clearance · 12mm IC · 0.4mm Rε (finishing) | CNMG120404 IC8250 | P20–P30 |
| CNMG120408 | 80° Diamond · 0° clearance · 12mm IC · 0.8mm Rε | CNMG120408 IC8250 | P20–P30 |
| DNMG150604 | 55° Diamond · 0° clearance · 15mm IC · 0.4mm Rε (finishing) | DNMG150604 IC8250 | P20–P30 |
| DNMG150608 | 55° Diamond · 0° clearance · 15mm IC · 0.8mm Rε | DNMG150608 IC8250 | P20–P30 |
| DNMG150612 | 55° Diamond · 0° clearance · 15mm IC · 1.2mm Rε (roughing) | DNMG150612 IC8250 | P20–P30 |
| SNMG120404 | 90° Square · 0° clearance · 12mm IC · 0.4mm Rε (finishing) | SNMG120404 IC8250 | P20–P30 |
| SNMG120408 | 90° Square · 0° clearance · 12mm IC · 0.8mm Rε | SNMG120408 IC8250 | P20–P30 |
| SNMG120412 | 90° Square · 0° clearance · 12mm IC · 1.2mm Rε (roughing) | SNMG120412 IC8250 | P20–P30 |
| TNMG160408 | 60° Triangle · 0° clearance · 16mm IC · 0.8mm Rε | TNMG160408 IC8250 | P20–P30 |
| TNMG160412 | 60° Triangle · 0° clearance · 16mm IC · 1.2mm Rε (roughing) | TNMG160412 IC8250 | P20–P30 |
Frequently asked questions
What is ISCAR IC8250?
IC8250 is a ISCAR carbide insert grade (SUMO TEC® CVD Al₂O₃), applied in the ISO P area, used in 10 insert designations in this reference.
Which grades are comparable to IC8250?
Grades from other makers confirmed at the same ISO application position by two or more manufacturer charts include Kyocera PR1225, Kyocera PR1725, Sandvik GC1525, Sumitomo AC1030U, Kennametal KCP25B. Same position is not the same performance: treat them as starting points and verify on a sample part before switching.
Does this cross-reference favour specific brands?
No. Comparable grades appear here only because manufacturer-published comparison charts place them at the same ISO application position. No manufacturer pays for placement, nothing on this page is sponsored, and CuttingToolsAI sells no tools and earns no commission. Placements backed by a single chart are flagged as such, and every comparison ends the same way: verify on a sample part before switching.
Grade charts by brand
Are you overpaying on your IC8250 inserts? Paste your insert list and get a cost audit in about 30 seconds: cross-brand equivalents at the same ISO application position, and where you are likely overpaying. No signup, no sales call.
Related grades