Carbide grade · Sandvik · ISO P
Sandvik GC4335
GC4335 is a Sandvik carbide insert grade (Inveio® CVD), applied in the ISO P area. In this cross-reference it appears on 1 insert designation; the same insert geometry is also made by ISCAR, Kennametal, Mitsubishi, Seco, Tungaloy, Walter. 5 grades from other makers are confirmed at the same ISO position by two or more manufacturer charts. Same position is not the same performance: verify on a sample part before switching.
Grade summary
- Brand
- Sandvik
- Coating / substrate
- Inveio® CVD
- ISO application area
- P — steel
- Application range (catalog)
- P30–P40
- Used in
- 1 insert designation in this reference
Cross-brand equivalents (manufacturer charts)
| Brand | Grade | Shared ISO positions | Status |
|---|---|---|---|
| ISCAR | IC9350 | P30 P35 P40 | Confirmed (2+ charts) |
| Kyocera | CA530 | P30 P35 P40 | Confirmed (2+ charts) |
| Mitsubishi | MC6035 | P30 P35 P40 | Confirmed (2+ charts) |
| MOLDINO | IP3000 | P30 P35 P40 | Confirmed (2+ charts) |
| Seco | TP3501 | P30 P35 P40 | Confirmed (2+ charts) |
| Kyocera | PV730 | P30 | Lead (one chart or partial overlap), not a recommendation |
| Kennametal | KC530M | P30 | Lead (one chart or partial overlap), not a recommendation |
| Kennametal | KCPK30 | P30 | Lead (one chart or partial overlap), not a recommendation |
| Kyocera | PR1230 | P30 | Lead (one chart or partial overlap), not a recommendation |
| Mitsubishi | MP6130 | P30 | Lead (one chart or partial overlap), not a recommendation |
Sandvik GC4335 plus up to two grades you run next to it, worked through in one document: every cross-brand match with the number of manufacturer charts behind it, single-source candidates kept apart, where your grades overlap so the list can be shortened, and a validation plan. Emailed to you, usually within the hour. No account needed.
Same insert geometry, other brands
These makers produce the same insert designation in their own grade. Shared geometry is not a grade equivalence.
| Brand | Grade | Coating | Shared designations |
|---|---|---|---|
| ISCAR | IC8350 | SUMO TEC® CVD Al₂O₃ | CNMG120412 |
| Kennametal | KCP30B | KENGold™ CVD | CNMG120412 |
| Mitsubishi | MC6035 | CVD Al₂O₃ | CNMG120412 |
| Seco | TP3500 | Duratomic® CVD | CNMG120412 |
| Tungaloy | T9235 | CVD TiCN/Al₂O₃ | CNMG120412 |
| Walter | WPP30S | Tiger·tec® Silver CVD | CNMG120412 |
Compare GC4335 side by side
Insert designations using GC4335
| Designation | Geometry | Catalog code | Application |
|---|---|---|---|
| CNMG120412 | 80° Diamond · 0° clearance · 12mm IC · 1.2mm Rε · heavy roughing | CNMG 12 04 12-PR 4335 | P30–P40 |
Frequently asked questions
What is Sandvik GC4335?
GC4335 is a Sandvik carbide insert grade (Inveio® CVD), applied in the ISO P area, used in 1 insert designation in this reference.
Which grades are comparable to GC4335?
Grades from other makers confirmed at the same ISO application position by two or more manufacturer charts include ISCAR IC9350, Kyocera CA530, Mitsubishi MC6035, MOLDINO IP3000, Seco TP3501. Same position is not the same performance: treat them as starting points and verify on a sample part before switching.
Does this cross-reference favour specific brands?
No. Comparable grades appear here only because manufacturer-published comparison charts place them at the same ISO application position. No manufacturer pays for placement, nothing on this page is sponsored, and CuttingToolsAI sells no tools and earns no commission. Placements backed by a single chart are flagged as such, and every comparison ends the same way: verify on a sample part before switching.
Grade charts by brand
Are you overpaying on your GC4335 inserts? Paste your insert list and get a cost audit in about 30 seconds: cross-brand equivalents at the same ISO application position, and where you are likely overpaying. No signup, no sales call.
Related grades