CUTTINGTOOLS / AI
Find equivalents

Carbide grade · ISCAR · ISO P/M/K/S

ISCAR IC908

IC908 is a ISCAR carbide insert grade (PVD TiAlN), applied in the ISO P/M/K/S areas. In this cross-reference it appears on 1 insert designation; the same insert geometry is also made by Sandvik. 2 Direct peers are from other makers, listed in the same row of a manufacturer comparison chart. This is chart comparability, not verified cutting performance. 222 more grades share an ISO position only and are not verified. Same position is not the same performance: verify on a sample part before switching.

Same ISO position in the manufacturer charts, with the source on the full page. Running several grades? Separate them with commas to check the whole list. No signup.

Every maker's AI recommends its own tools. Ours compares all makers and shows the published source behind each answer, or tells you it could not verify.

Grade summary

Brand
ISCAR
Coating / substrate
PVD TiAlN
ISO application area
P — steel · M — stainless steel · K — cast iron · S — superalloys & titanium
Application range (catalog)
P20 · K20
Used in
1 insert designation in this reference

Cross-brand alternatives (manufacturer charts)

Direct peers

Listed in the same row of a manufacturer comparison chart. This is chart comparability, not verified cutting performance.

  • Sandvik GC1125 ISO P20 S20 S25 · 1 chart (Ingersoll)
  • TaeguTec TT9080 ISO K20 P25 S20 S25 · 2 charts (Korloy, TaeguTec)

Same ISO position, not verified

These grades overlap in ISO position only. No manufacturer chart lists them together, and operation and tool material are not verified.

  • Mitsubishi VP15TF ISO K20 M10 M30 M35 P20 S20 S25 · not verified · carbide
  • Tungaloy AH725 ISO M10 M30 M35 P20 S20 S25 · not verified
  • Kyocera PR1225 ISO M10 M30 M35 P20 P25 · not verified · carbide
  • Sumitomo AC1030U ISO K20 M30 M35 P20 P25 · not verified · carbide
  • Seco CP500 ISO M30 M35 P25 S20 S25 · not verified

152 more not shown.

Tougher alternatives

Positioned above this grade on the ISO scale (more toughness, less wear resistance). ISO position only, not verified.

26 more not shown.

More wear-resistant alternatives

Positioned below this grade on the ISO scale (more wear resistance, less toughness). ISO position only, not verified.

  • Kyocera PV720 ISO P20 · not verified · cermet
  • Kyocera TN620 ISO P20 · not verified · cermet
  • Mitsubishi MC7015 ISO M10 · not verified
  • Mitsubishi NX2525 ISO P20 · not verified · cermet
  • Sumitomo AC6020M ISO M10 · not verified

29 more not shown.

Check IC908 with your other grades →

Free · engineer's note · by email

The best-evidenced alternative to ISCAR IC908 from another maker, with published cutting speeds (sourced, and compared only where both makers publish them for the same conditions), coating and what would decide a switch. Usually in your inbox within 30 minutes.

Source-backed grade report · PDF + XLSX

Check ISCAR IC908 against the published chart evidence first. If this grade has a documented candidate, you can order an automatically generated report for one grade (about US$10, charged EUR 9), or add up to two grades (about US$24, charged EUR 22). Currency conversion and tax at checkout may change the USD amount. A chart comparison is not a guaranteed substitute.

Check this grade and see the report →

Same insert geometry, other brands

These makers produce the same insert designation in their own grade. Shared geometry is not a grade equivalence.

BrandGradeCoatingShared designations
Sandvik GC3040 CVD WCMX050308

Insert designations using IC908

DesignationGeometryCatalog codeApplication
WCMX050308 80° Trigon · 0° clearance · 5mm IC · indexable drill insert WCMX 050308 IC908 P20 · K20

Frequently asked questions

What is ISCAR IC908?

IC908 is a ISCAR carbide insert grade (PVD TiAlN), applied in the ISO P/M/K/S areas, used in 1 insert designation in this reference.

Which grades are direct peers of IC908?

2 grades from other makers are listed in the same row of a manufacturer comparison chart as IC908: Sandvik GC1125, TaeguTec TT9080. This is chart comparability, not verified cutting performance. Grades that share only the ISO position are listed separately as not verified. Same position is not the same performance: verify on a sample part before switching.

Does this cross-reference favour specific brands?

No. Comparable grades appear here only because manufacturer-published comparison charts place them at the same ISO application position. No manufacturer pays for placement, nothing on this page is sponsored, and CuttingToolsAI sells no tools and earns no commission. Placements backed by a single chart are flagged as such, and every comparison ends the same way: verify on a sample part before switching.

Grade charts by brand

Ask the AI advisor about IC908
Cutting data for your material, when IC908 is the right call versus its equivalents, and what to check before switching — answered with verified reference data plus live search. Edit the question and hit Ask — 3 free answers a day, no account.
Cost check · free · brand-neutral

Are you overpaying on your IC908 inserts? Paste your insert list and get a cost audit in about 30 seconds: cross-brand candidate alternatives at the same ISO application position, and where you are likely overpaying. No signup, no sales call.

Run a free cost audit → Check your whole grade list · free

After the free check: a sourced PDF + XLSX report from EUR 9 for one grade. How buying works

Related grades

Where IC908 is used: designations and materials